Foundation Inspection by an Engineer: What It Covers and What It Costs

Hairline cracks running through a cast concrete wall, the kind an engineer maps during a foundation inspection

Hairline cracks in cast concrete. Most cracks like these are not structural, but their pattern, width and change over time tell the engineer what the foundation is doing. (Photo: Photo by phil cruz on Unsplash · Unsplash License)

A foundation inspection by an engineer is an independent evaluation. A licensed professional engineer looks at the building, measures how the foundation has moved, works out why, and puts conclusions and recommendations in a report. In Texas, three very different services all get called a "foundation inspection": a home inspector's visual check, a repair company's free visit and an engineer's evaluation. Only the engineer's evaluation is meant to diagnose the cause and recommend what, if anything, should be done.

Three kinds of foundation inspection

Real estate (home) inspectorRepair contractor's "free inspection"Engineer's evaluation
WhoTREC-licensed inspectorSales or field staff of a repair companyLicensed professional engineer
PurposeReport general condition at the time of saleAssess whether to sell a repairDiagnose cause and recommend options
What you getWritten opinion on foundation performance, with visible indications listedRepair proposalReport with observations, measurements, conclusions and alternatives
Diagnoses the cause?NoNot independentlyYes
Independent of repair work?YesNoYes, under ASCE Texas ethics guidance

The TREC Standards of Practice (22 TAC §535.228) require an inspector to give a written opinion on the foundation's performance and report the visible signs behind it. They don't require the inspector to give an exhaustive list of those signs, or to enter a crawl space with less than 18 inches of headroom.

The Texas Board of Professional Engineers and Land Surveyors addressed where the line sits in Policy Advisory Opinion 43. An inspector doing a visual inspection under the TREC standards isn't practicing engineering. Analyzing the cause of a condition, recommending repairs or giving any other expert engineering opinion on a foundation is the practice of engineering.

The Texas Section of ASCE says evaluation and repair design should be done by a professional engineer licensed in Texas. It also says the evaluating engineer has to avoid conflicts of interest. That's the reason to separate the evaluation from whoever will sell you the repair.

What an engineer actually does on site

The ASCE Texas Guidelines for the Evaluation and Repair of Residential Foundations set out three levels of investigation. They're written for houses, but the same structure is a useful way to scope any foundation evaluation. Agree on the level with the engineer before the visit.

LevelWhat it includesWhen it fits
AInterview the owner about the building's history. Review drawings, geotechnical reports and past repair records. Walk through the building and observe what's affecting the foundation. Written report if requested, identified as a report of first impressions.A quick opinion, or deciding whether more work is worth it
BEverything in Level A, plus a relative elevation survey of the foundation or floor and a drawing of those elevationsMost purchase or distress evaluations
CLevels A and B, plus testing the engineer judges necessary: soil sampling, plumbing tests, material tests, a reinforcing survey, post-tension tendon testing. Reporting may add scaled drawings, a tree survey and a detailed distress survey.Disputes, repair design, or where the cause isn't clear

The guidelines also describe the method: observe and collect data, analyze it, form hypotheses about the cause, test them and reach a conclusion. Cracks and sloping floors are the starting point. The report has to explain them.

For commercial and institutional buildings, ASCE/SEI 11, Guideline for Structural Condition Assessment of Existing Buildings, lays out a similar path from a preliminary assessment to a detailed one, with material testing and evaluation methods for concrete, masonry, steel and wood.

How the elevation survey is read

The relative elevation survey is the center of most evaluations. The engineer shoots floor elevations across the building with a level, then plots the shape of the foundation. Two things matter.

Deflection. That's bending, measured as a ratio: the largest deviation from a straight line between two points, divided by the distance between them. The ASCE Texas guidelines borrow the code limit of L/360 for floor members as a reference point. Below L/360, the foundation is unlikely to have deflected materially unless the building shows otherwise. Above L/360 with clear symptoms, the engineer is generally justified in calling the deflection excessive.

Tilt. That's a planar slope across the whole foundation. The guidelines note that a floor slope over 1 percent is usually noticeable, and that the Americans with Disabilities Act treats a 2 percent slope as too steep.

There's an important caution. Without an as-built or earlier survey, nobody knows exactly how flat the slab was on day one. The guidelines say a single survey shouldn't be the only basis for judging deflection and tilt. Engineers cross-check it against brick coursing, door alignment, countertops and crack patterns, and sometimes repeat the survey over months to see whether the building is still moving.

Signs that call for an evaluation

The ASCE Texas guidelines list the visible signs of foundation movement. These are the ones worth writing down before you call:

  • Cracks or separations in exterior walls, or masonry veneer rotating or bulging
  • Cracks in concrete foundation elements
  • Cracks in drywall walls and ceilings, or walls separating from floors or ceilings
  • Doors and windows racked out of square, sticking or not latching
  • Cracked, buckled or separated floor coverings
  • Joints that used to be tight opening up
  • Posts, piers or walls visibly out of plumb

None of these proves the foundation has failed. The guidelines point out that the majority of cracks don't compromise structural integrity, and that a symptom's significance depends on the building's age and any earlier repairs. That's why the engineer measures before drawing a conclusion.

Why foundations move in North Texas

On the expansive clays common across North Texas, most foundation movement comes from changes in soil moisture. The ASCE Texas design guidance lists the usual culprits: water ponding from poor drainage, watering beds right against the foundation, leaking plumbing and utility lines, and large trees drying the soil near the slab. Trees cleared just before construction can leave dry ground that heaves later. A good evaluation looks at all of these, because the fix for a drainage problem is very different from the fix for a structural one. If the evaluation points to plumbing under a suspended floor, our article on suspended foundations and plumbing covers that side.

What a foundation inspection costs, and why

We won't print a price, because there isn't a standard one. The fee follows the scope. What moves it:

  • Level of investigation. A Level A walk-through and letter is the smallest scope. A Level B elevation survey adds field time and drafting. Level C testing adds subcontracted work and more analysis.
  • Building size and access. A large commercial floor plate, multiple buildings, or crawl spaces and finished floors that hide the slab take longer.
  • Testing. Soil borings, plumbing tests, concrete cores or reinforcing scans each add cost.
  • Report and use. A purchase-decision letter costs less than a report written for a dispute, an insurance claim or a repair design.
  • Repeat visits. Monitoring movement over months means more than one survey.

Ask for a written scope that names the level of investigation and the deliverable. Then compare proposals scope against scope.

What to have ready before the engineer comes

  • Original construction drawings and any foundation plan
  • The geotechnical report, if one was done
  • Records of earlier repairs, with dates and the contractor's drawings
  • Any previous elevation surveys or inspection reports
  • Your own notes and dated photos of cracks, doors and floors
  • Plumbing leak history and water bills, if usage spiked
  • Changes to drainage, irrigation, trees or additions near the building

The ASCE Texas guidelines list document review as part of even the most basic evaluation, so having these ready saves time and often fee.

Foundation evaluations for commercial and municipal buildings

Isbell Engineering Consultants provides structural engineering services that include structural assessments and inspections, condition assessments of existing buildings and structural integrity evaluations. Its geotechnical engineering services include geotechnical forensics and failure analysis when the soil is the question. The firm works on commercial, industrial, municipal and educational buildings. If you own or manage a building in North Texas showing signs of foundation movement, describe the building and what you're seeing through the contact page.

Frequently asked questions

What happens during a foundation inspection by an engineer?

The engineer interviews the owner, reviews any drawings and reports, walks the building inside and out, and usually shoots a relative elevation survey of the floor. They then explain the cause of any movement and recommend options in a written report. More detailed evaluations add soil, plumbing or material testing.

How much does a foundation inspection cost?

It depends on the scope: the level of investigation, building size and access, any testing, and how the report will be used. Ask engineers for a written scope and fee so you can compare like for like.

Does a home inspector check the foundation?

Yes, at a visual level. In Texas, TREC standards require the inspector to give a written opinion on foundation performance and note visible indications. Diagnosing the cause or designing a repair is engineering work, according to TBPELS Policy Advisory Opinion 43.

How do you know if a foundation is bad?

Look for wall and drywall cracks, doors and windows that stick or won't latch, sloping or cracked floors, and brick or posts out of plumb. Any one of these can have a minor cause. An engineer's elevation survey and evaluation tell you whether the foundation has actually moved enough to matter.

Should I get an engineer or a foundation repair company?

If you want an independent answer about whether repair is needed, start with an engineer who isn't selling the repair. The Texas Section of ASCE guidelines call for the evaluating engineer to avoid conflicts of interest.

Sources

  1. Texas Section ASCE, Guidelines for the Evaluation and Repair of Residential Foundations, Version 2 (adopted May 1, 2009)
  2. Texas Section ASCE, Recommended Practice for the Design of Residential Foundations, Version 2 (adopted October 4, 2007), Appendix A
  3. 22 Tex. Admin. Code §535.228, TREC Standards of Practice: Minimum Inspection Requirements for Structural Systems
  4. Texas Board of Professional Engineers and Land Surveyors, Policy Advisory Opinion 43 (TREC inspectors and foundation performance opinions, 2018)
  5. ASCE/SEI 11-99, Guideline for Structural Condition Assessment of Existing Buildings

Image credits

Copyright © 2026 Isbell Engineering Consultants - All Rights Reserved.

Privacy Policy