
Steel roof framing before the deck goes on. The structural engineer sizes these members and the connections between them. (Photo: Photo by D R (@dkphotos22) on Unsplash · Unsplash License)
A structural engineer designs the parts of a building that hold it up: foundations, columns, beams, walls, roof framing and the connections that tie them together. On a commercial project in Texas, the structural engineer also seals the structural drawings the city reviews, answers the contractor's questions during construction and reviews the steel and precast shop drawings before anything is fabricated. The best time to bring one in is earlier than most owners think, usually before the floor plan is locked.
This guide walks through what the structural engineer does in each phase, what Texas law requires, and the signs you need one now rather than later.
The short version: they make sure every load on the building has a path to the ground, and that every piece along that path is strong and stiff enough.
Loads come from gravity (the building's own weight, people, storage, rooftop equipment), from the weather (wind, snow, rain ponding) and from the ground (seismic shaking, soil pressure on walls). In the US, most of those loads are set by ASCE/SEI 7, Minimum Design Loads and Associated Criteria for Buildings and Other Structures, which the building code adopts by reference. The current edition, ASCE 7-22, covers wind, seismic, snow, rain and flood loads and added tornado load provisions. Our article on design loads for metal buildings goes into how those numbers are chosen.
The engineer then picks a structural system (steel frame, concrete, masonry, wood or a mix), sizes the members, designs the connections and lays out the foundation with input from the geotechnical report. The output is a set of structural drawings, general notes and specifications that a contractor can price and build from.
Owners often picture the engineer as someone who "runs the calcs" once and disappears. On a commercial job the work spans the whole project.
| Phase | What the structural engineer does | What the owner gets |
|---|---|---|
| Feasibility / concept | Reviews the site and building program, flags long spans, heavy equipment or poor soils, suggests framing systems | Early cost and schedule risk, a realistic structural depth to plan ceilings around |
| Schematic design | Picks the framing system and column grid with the architect, coordinates with the geotechnical engineer on foundation type | A grid and system the rest of the team can design to |
| Design development | Sizes members, sets foundation layout, coordinates openings for mechanical and plumbing | Drawings good enough for a reliable estimate |
| Construction documents | Final calculations, sealed drawings and specifications, statement of special inspections | The permit set |
| Bidding and permitting | Answers bidder questions, responds to plan review comments | Fewer change orders from unclear documents |
| Construction | Reviews shop drawings, answers RFIs, makes site observation visits | A check that what gets built matches what was designed |
That last row matters. The structural drawings are only as good as the way the contractor reads them, and shop drawing review is where fabrication errors get caught on paper instead of in the field.
Texas is strict about who may practice engineering and how engineering documents are issued. Three rules come up on almost every commercial project.
Sealed documents. Under Texas Occupations Code §1001.401, a plan, specification, plat or report issued by a license holder for a project to be built in Texas must carry the engineer's seal. The Texas Board of Professional Engineers and Land Surveyors (TBPELS) adds detail in its rule 22 TAC §137.33: the engineer signs, seals and dates the final version before it leaves their control, and preliminary documents must carry a statement that they're released for interim purposes, under whose authority and on what date.
Registered firms. Under §1001.405, a business may not practice engineering in Texas unless it is registered with the board, and the TBPELS rule requires every engineering document, preliminary ones included, to show the firm name and registration number. When you receive drawings, look for both the engineer's seal and the firm number.
Which buildings need an engineer. Texas exempts some private buildings from the engineering requirement under §1001.056, including private dwellings, small apartment buildings and certain single-story buildings under 5,000 square feet with short spans. The exemption doesn't cover residential foundations on expansive soil unless they follow the residential code. Most commercial, industrial, municipal and school buildings fall well outside the exemption. Check with your local building department, since cities set their own permit submittal requirements on top of state law.
Texas licenses structural engineers as Professional Engineers. A handful of other states issue a separate Structural Engineer (SE) license for certain building types, so if your project crosses state lines, confirm what that state requires. NSPE summarises the general path to a PE license: an accredited engineering degree, the Fundamentals of Engineering exam, four years of progressive experience under a PE, and the Principles and Practice of Engineering exam.
Chapter 17 of the 2021 International Building Code requires special inspections and tests on many commercial projects, covering things like concrete, structural steel welding and bolting, masonry and soils. Two details catch owners off guard:
So budget for special inspections separately from the contractor's price, and ask your structural engineer early which items will be on the statement.
You need one on any new commercial, industrial or public building. The more useful question is timing. Bring one in:
Price matters, but on most commercial projects the engineering fee is small next to the cost of a redesign, a delay or an over-built frame. A few things worth checking:
Isbell Engineering Consultants is a structural, geotechnical and civil engineering firm based in Valley View, Texas. Its structural engineering services include structural design in steel, concrete, masonry and timber, structural assessments and inspections of existing buildings, renovation and retrofit design, and construction phase services such as shop drawing review, on-site construction observation and RFI responses. Projects include commercial and industrial buildings, warehouses, municipal and educational facilities; you can see examples in the project gallery. If you're planning a project and want a structural engineer involved early, send the details through the contact page or browse the full list of services.
They design the load-carrying parts of the building (foundation, frame, floors, roof structure and connections), prepare sealed structural drawings and specifications, and during construction they review shop drawings, answer contractor RFIs and observe the work.
In most cases, yes. Texas law requires engineering documents for Texas projects to be sealed by a licensed engineer, and the exemptions in Occupations Code §1001.056 are narrow (private dwellings, small apartment buildings and certain small single-story buildings). Your city's building department sets the permit submittal rules, so confirm with them.
The architect leads the overall building design: layout, appearance, code egress, envelope and finishes. The structural engineer designs the system that holds the building up and resists wind, seismic and soil loads. On commercial projects they work as one team, usually with the structural engineer as a consultant to the architect or hired directly by the owner.
Search the individual's name on the TBPELS licensee roster and the firm on the TBPELS firm roster. Sealed drawings should also show the engineer's seal and the firm's registration number, which TBPELS rule 137.33 requires.
Under IBC §1704.2, the owner or the owner's authorized agent (not the contractor) employs the special inspection agency. Budget for it separately from the construction contract.
Copyright © 2026 Isbell Engineering Consultants - All Rights Reserved.
Made & Managed by North Texas Business Solutions